2015

Purpose: Improved efficiency of wood chip boiler for district heating water SEG A/S has delivered, installed and commissioned a new LT16C absorption chiller with a cooling capacity of 430 kW. The chip boiler delivers driving heat to the chiller's generator at a temperature of around 100°C. The scrubber circuit from smoke scrubber 2 is routed directly through the chiller evaporator circuit, where the scrubber water is cooled down to around 26°C. The cooling machine's evaporator tubes, end plates ...

Ry Varmeværk a.m.b.a Read more "

Purpose: Improved efficiency of wood chip boiler With this project, SEG A/S designed, delivered and commissioned a turn-key solution consisting of:Flue gas scrubber for cooling flue gases to around 15°C.Thermax LT10C absorption heat pump with a cooling capacity of 300 kWPipe connections and pumpsThe wood chip boiler supplies driving heat to the chiller generator at a temperature of around 114°C. The scrubber circuit from the flue scrubber is led directly through the ...

Vestervig District Heating Read more "

Purpose: Improved efficiency of gas engine plant SEG A/S has supplied, installed and commissioned an HS80 DP hot water driven absorption heat pump with a cooling capacity of 3.3 MW. The cooling power is used to cool the flue gases on their two gas engines before the flue gases are led into the chimney. Two hot water exchangers, where the gas engine exhaust gases are exchanged with water, heat the drive energy for the heat pump generator to 150°C. The heat pump ...

Sæby Varmeværk a.m.b.a Read more "

Purpose: Improved efficiency of waste boiler for district heating SEG A/S has supplied, installed and commissioned an SS80 AP steam driven absorption heat pump with a cooling capacity of 3.3 MW. The cooling power is used to cool the flue gas at their waste incineration plant, which was previously fed into the chimney at 145°C, but is now cooled down to around 25°C. As a result, the heat utilization ...

HKV Horsens Read more "